 |
|
|
|
|
|
|
|
|
|
|
|
Innovative plastic refractories that can be applied simply by gunning without mixing with water at site.
Dense, light weight insulation and phosphate bond types are available. |
|
|
|
|
|
|
Rumming Refractories
PLITAB ---
PLIRAM ---
PLIBRICO SUPER --- |
|
|
| Refractories with plasticity for ramming installations. |
|
|
|
|
|
|
Patching Refractories
PLITAB ---
PLIRAM --- |
|
|
| Putty-like refractories softer than rumming refractories. Recommendable for partial repair of small damaged areas. |
|
|
|
|
|
|
High Abrasion Resistance Plastic Refractory
PLIRAM CYCLONE MIX |
|
|
| Chemical-bonded refractory materials developed for applying to the linings of cyclone, transfer pipe, etc. of the FCC unit, which require high abrasion resistance. |
|
|
|
|
|
|
Plastic Refractories
for Aluminum Melting Furnace
PLIRAM AL-TUFF ---
PLIBRICO HyRATE AL-TUFF--- |
|
|
| Plastic refractories for aluminum melting furnace and holding furnace, excellent in heat resistance and aluminum penetration resistance. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wet Gunning Castable Refractories
PETGUN ----
PETGUN SIC ---- |
|
|
| Castable refractories for PET (wet gunning method). Generates almost no dust compared to dry gunning and therefore provides clean work environment and excellent adhesion to the furnace shell and linings. |
|
|
|
|
|
|
Castable Refractories
PLICAST --- |
|
|
| Powder-type dry refractory materials composed of refractory aggregates and alumina cement or other powdered binder. |
|
|
Pouring
Vibrating
Troweling |
|
|
|
|
High-Strength Castable Refractories
PLICAST SUPER HyMOR ---
|
|
|
| High-strength castable refractories for vibration installation, possible to construct high-density and low-porosity lining. |
|
|
|
|
|
|
|
|
| Free-flow castable refractories, which develop good consistency with lower water ratio than ordinary castables. Excelled in strength. It is suitable for areas requiring high abrasion resistance. |
|
|
|
|
|
|
Silicon Carbide Castable Refractories
PLICAST SIC---
PLIFLOW SIC--- |
|
|
| High-strength castable refractories containing silicon carbide. Equipped with high strength and thermal conductivity and superior spalling resistance . |
|
|
|
|
|
|
Acid Resistant Castable Refractories
PLICAST AR--- |
|
|
| Castable refractory good for use in linings of flue gas duct, stack and pressur vessel that require acid resistance. |
|
|
|
|
|
|
Castable Refractories
for Aluminum Melting Furnace
PLICAST AL-TUFF --- |
|
|
| Castable refractories for aluminum melting furnace and holding furnace, excelled in heat resistance and aluminum penetration resistance. |
|
|
|
|
|
|
Insulating Castable Refractories
PLICAST LWI ---
PLICAST ---LITE |
|
|
| Light weight insulating castable refractories with low thermal conductivity and excellent insulation property. |
|
|
|
|
|
|
Gunning Castable Refractories
PLIGUN --- |
|
|
| Castable refractories developed for dry gunning installation. |
|
|
|
|
|
|
Silicon Carbide Gunning Castable Refractories
PLIGUN SIC --- |
|
|
| Gunning castables including silicon carbide, equipped with high thermal conductivity. Excellent in gunning workability. |
|
|
|
|
|
|
Acid Resistant Gunning Castable Refractories
PLIGUN AR ---
PLIGUN LAR --- |
|
|
| Gunning castable refractories good for use in linings of flue gas duct, stack and pressure vessel with acidic environment that require acid resistance. |
|
|
|
|
|
|
Gunning Insulating Castable Refractories
PLIGUN LWI --- |
|
|
| Light weight insulating castables for gunning application, with low thermal conductivity and excellent insulation property. |
|
|
|
|
|
|
Injection Refractories
PLISTIX BF MIX--- |
|
|
| Refractories for injection repair of local hot spots in oil refinery and petrochemical plant furnaces and steelmill blast furnaces. Applicable to hot condition repair. |
|
|
|
|
|
|
Coating Castable Refractories
PLICOAT ---
PLISTIX MIX --- |
|
|
| Coating refractories for repair of abraded surfaces of brick and castable linings. |
|
|
|
|
|
,PLIBRICO